Detailed Product Description

Proximity sensor:

Shield

Sensing methodSensing distanceSetting distanceDifferential distanceSensing objectStandard sensing objectResponse frequencyPower supply voltageOperating voltage rangeCurrent consumptionControl output (Output type)Control output (Switching capacity)Control output (Residual voltage)IndicatorOperation modeProtective circuitStandard or Different frequencyAmbient temperatureAmbient humidityTemperature influenceVoltage influenceInsulation resistanceDielectric strengthVibration resistanceShock resistanceDegree of protectionApplicable standard (EC Directive (Low Voltage Directive))Applicable standard (EC Directive (EMC Directive))Applicable standard (CCC mark)Connection methodWeight (Packed state)Material (case)Material (sensing surface)Accessories

Unshielded

Inductive type

3 mm -10% to +10%

0 to 2.4 mm

10% Max. of sensing distance

Ferrous metal (Sensitivity lowers with non-ferrous metals.)

Iron 12*12*1mm

DC: 600 Hz (average)

12 to 24 VDC ripple(p-p) :10% Max.

10 to 30 VDC

15 mA Max. (at 24VDC)

NPN open collector output

0 to 100 mA (30VDC Max.)

(DC) 1 V Max. (under load current with cable length of 2m)

Detection indicator(red)

NO

Surge suppressor Power supply reverce polarity protection

Standard

Operating: -25 to 70 CEL Storage: -25 to 70 CEL (with no icing or condensation)

Operating: 35 to 95 %RH Storage: 35 to 95 %RH (with no condensation)

+-10% Max. of sensing distance in temperature range of -25 to +70CEL (As the basis for sensing distance of 23CEL)

+-2.5% Max. of sensing distance in rated voltage range +-10%. (As the basis for sensing distance at standard power voltage)

50 M OHM Min. at 500VDC between charged parts and the case

1000 VAC 50/60 Hz for 1 minute between charged parts and the case

10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

500m/s2 for 3 times each in X, Y, and Z directions

IEC60529: IP67 Company standard: Oil-proof

EN60947-1 EN60947-5-2

EMI: EN60947-5-2 Emission Enclosure: CISPR11 Group 1 classA EMS: EN60947-5-2 Immunity ESD: IEC61000-4-2 Immunity RF-interference: IEC61000-4-3 Immunity Conducted Disturbance: IEC61000-4-6 Immunity Burst: IEC61000-4-4 CE marking: Equipped

Not equipped

Pre-wired models (Cable length: 2 m)

approx. 30 g

Heat-resistant ABS resin

Heat-resistant ABS resin

Instruction manual, Mounting bracket